A decorative paint with a "soft touch" effect for interior use. Suitable for gypsum plaster, filler, gypsum board, and drywall. It features exceptional tactile softness and a pleasant texture. It creates a matte suede-like visual effect. After drying, it creates a completely non-glossy matte surface. The material is easy to apply.
Composition: styrene-acrylic dispersion, special pigments, auxiliary substances, water.
Surface preparation: The substrate must be uniformly prepared, strong, dry, and free of grease, sawdust, chalk, lime, and other contaminants. Remove mold, moss, and mildew mechanically and treat affected areas with an anti-mold agent. Loose parts of the substrate must be removed by sanding the surface to a firm layer. Uneven surfaces should be smoothed with filler. After thoroughly preparing the surface, be sure to apply an acrylic primer diluted to the appropriate ratio. Six to eight hours after applying the primer, apply 1-2 coats of paint to the surface using a low-nap roller until a smoother surface is achieved. The color of the intermediate coat should match the color of the topcoat. Using materials from other manufacturers may cause product degradation before and after application.
Application Method: During storage, the material may separate, but this is not a sign of product deterioration. Stir before application. The material can be thinned up to 10% with water. Do not dilute the final coat. The material can be applied with a flat brush, spatula, or trowel.
Spatula Application: Apply the material in an even coat using a stainless steel trowel. Apply the material in two coats. When applying the second coat, avoid overlapping the seams of the first coat.
Brush Application: Apply the material with a brush using a crisscross motion, spreading it evenly across the surface. After 3-5 minutes (depending on the temperature and relative humidity), brush over the surface of the material, removing brush marks. After the first coat has dried, apply another coat in the same manner. When applying, use material from the same batch on a single surface. If using material from different batches, mix them together in the amount required for a single surface (from corner to corner). When applying, avoid applying the material to highly heated surfaces, surfaces exposed to direct sunlight and drafts, and prevent the freshly treated surface from becoming exposed to moisture.
Drying time: 24 hours – completely dry. Drying time between coats: 6-8 hours. Do not expose to flashing for less than 28 days. Drying time depends on temperature and humidity. These drying time parameters are based on a temperature of +20±2°C and a relative humidity of no more than 55±5%.
Color: White.
Solvent: water (drinking type).
Application and drying temperature: During application and during the first 24 hours of drying, the ambient and substrate temperature must be no lower than +7°C and no higher than +30°C.
Consumption: 1 liter per 9-10 m² of a single-layer coating (depending on the substrate type and application method).
Storage: Store in a tightly sealed container at a temperature no lower than +7°C and no higher than +30°C, in a cool, dry place. Protect from frost! The guaranteed shelf life is 2 years. The manufacturing date is indicated on the packaging.
Safety precautions: Work in a ventilated area, wearing protective clothing and gloves. Dispose of as household waste. Keep out of reach of children! After washing, rinse with water and clean with a household detergent.