Bergge Decolasur is an acrylic glaze for decorative finishing of surfaces in a Provençal style. It is applied to textured surfaces created with modeling fillers and plasters, textured paints, and other decorative plasters. For exterior and interior use.
Composition: styrene-acrylic dispersion, calcium carbonate, talc, wax emulsion, auxiliary substances, water.
Surface preparation: The surface must be uniformly prepared, strong, dry, and free of grease, dust, chalk, and lime.
Application method: During storage, some separation of the material is possible, but this does not indicate product deterioration. Stir before use. When applying Bergge Decolasur, use material from the same batch on a single surface. If material from different batches is available, mix it together in the amount required for a single surface (from corner to corner). If necessary, dilute with water (up to 30%). Apply Bergge Decolasur decorative matte glaze with a brush or roller. Then spread (spread) with a sponge or flexible plastic spatula. Work at ambient and substrate temperatures no lower than +7°C and no higher than +30°C. Avoid exposure to wind, rain, and direct sunlight during application.
Helpful tip: It's best to work with two people: one applies the glaze with a roller, while the other creates a decorative finish with a sponge or plastic spatula.
Drying time: 12 hours (depending on temperature and humidity).
Tinting: Tinted using specialized equipment.
Coverage: 1 liter per 10-12 m² of a single-layer coating.