Bergge Acryl Farbe is a weather-resistant acrylic paint for exterior and interior use. It forms a water-repellent, moisture-resistant, flexible, and durable coating. It is resistant to wet abrasion. It is intended for painting building facades and creating wear-resistant and moisture-resistant coatings indoors. It is suitable for painting cement plaster, concrete, brick, facade insulation surfaces, as well as gypsum substrates, plasterboard, fiberboard, chipboard, QSB and OSB, plywood, wood, and wallpaper indoors. It is environmentally friendly and solvent-free. It complies with European quality standards.
- Eco-friendly;
- Water-based matte finish;
- Easy to use;
- Weather-resistant;
- Good hiding power;
- High vapor permeability;
- Heavily load-bearing.
Paint application: Mix thoroughly before use. The surface must be clean, dry, and workable. Apply with a brush, roller, or spray. Dilute the first coat with water to 10% of the total weight; the second coat can be undiluted. Carefully remove any remaining lime wash, efflorescence, mineral- or oil-based coatings, and other contaminants. Fill cracks, prime, and fill. Fresh cement plaster must be cured for at least 28 days, concrete for at least 3 months, and thermal insulation surfaces for at least 7 days. The moisture content of the substrate must not exceed 4%, and 1% for gypsum substrates. Sand strong alkyd and oil coatings. Dust the surfaces and treat them with a Bergge primer. Apply in two coats with a brush, roller, or sprayer, including airless spraying. Painting surfaces in the same plane should be carried out using the "wet on wet" method, without interruption. Consumption per coat is 100-140 ml/m², depending on the grain size of the substrate. Drying time before applying the next coat is 1-2 hours, complete drying is 8-10 hours at a base temperature of +20°C and a relative air humidity of 60%. Under other conditions, drying and curing times may change. Do not paint if the substrate and ambient temperature are below +5°C and the relative humidity is no more than 80%. Rinse tools with water immediately after finishing work.
Storage: The paint should be stored in a tightly sealed container in a cool place at temperatures between +5°C and +30°C.
Tinting: Bergge Acryl Farbe paint is machine tinted.
Composition: Titanium dioxide, functional additives, mineral fillers, water. The maximum permissible concentration of volatile organic compounds (VOCs) for category A/a materials, according to the EU Directive, is 75 g/l (2007) and 30 g/l (2010); this product contains <1 g/l VOCs.
Precautions: Keep out of reach of children. In case of contact with eyes, rinse immediately with clean water. Do not inhale vapors when spraying. Do not dispose of paint in drains, waterways, or on the ground.
Shelf life: 36 months in tightly sealed packaging at temperatures from +5°C to +30°C. See the production date and batch number on the packaging.