BERGGE SILIKONPUTZ is a thin-layer decorative silicone plaster for facades, made with German raw materials and a German formula. It is an environmentally friendly material and boasts superior vapor permeability and UV resistance compared to similar European products.
1.5 mm thick lamb - 2.4 kg/m²; 2 mm thick bark beetle - 3.2 kg/m².
Recommended for finishing facades in areas with highly aggressive environmental impacts: sea coasts, industrial zones, and areas with high precipitation. It can also be used to create durable, wear-resistant coatings indoors.
Characteristics:
- Eco-friendly material;
- Excellent self-cleaning;
- High resistance to dirt and weathering;
- Good water-repellent properties;
- Highly vapor-permeable and moisture-resistant;
- Characterized by increased adhesion and elasticity;
- Elasticity;
- Easy to apply.
Recommended for use as a decorative finishing layer and for finishing concrete, prepared brick, plaster, gypsum surfaces, and gypsum plasterboard sheets both indoors and outdoors.
Substrate: must be dry, not frozen, strong, and capable of bearing loads.
Application: no earlier than 24 hours after applying the primer mixture. When using tinted plaster, the primer should be tinted to the same color. Using a stainless steel trowel, apply evenly to a thickness equal to the grain size. For a "lamb" texture, immediately after application, texture it with a plastic float using circular motions. For a "bark beetle" texture, after some time, texture it with a plastic float vertically, horizontally, or in a circular motion. Large surface areas should be divided into several smaller ones or worked in groups. The entire surface must be treated wet-on-wet. Wash tools with water immediately after finishing work. Drying time is 24 hours at 20°C and 65% humidity. Complete drying and repainting are possible after 2-3 days. Coverage: 1.5 mm thick lamella coating is approximately 2.4 kg/m², while 2 mm thick bark beetle coating is approximately 3.2 kg/m². The exact coverage is determined by a test application on site. Do not apply at temperatures below 5°C or above 30°C, or if the surface is exposed to direct sunlight, rain, strong wind, or drafts.
Tinting: Can be machine tinted. Apply plaster of the same batch number to the same surface, or thoroughly mix products from different batches!
Storage: Store in a dry place between +5°C and +30°C. The guaranteed shelf life in sealed factory packaging is 24 months.
Safety precautions and disposal: Keep out of reach of children. Avoid contact with eyes or skin. Dried plaster should be disposed of as construction waste.