Bergge Marmorino is a decorative marble-effect plaster that creates a stunning marble effect. Its thickness enhances the appearance while simultaneously helping to conceal minor wall imperfections without the need for additional leveling. Marmorino creates a smooth, matte finish.
Properties:
- Eco-friendly material;
- Helps conceal minor wall imperfections;
- Easy to apply;
- Magnificent decorative marble effect;
- Depending on the tool used, a wide range of decorative effects can be achieved on the surface.
Preparation:
The substrate must be well dried and cured. Allow at least 30 days after applying new plaster for complete carbonation. Thoroughly clean or wash the surface, removing any loose parts. If restoration work is underway, water stains must be repaired.
Apply Bergge Marmorino in two coats, approximately 7-8 hours apart, using a stainless steel trowel. Treat the entire wall surface. For a "polished marble" effect, finish with BERGGE VENICE, applying a thin layer of the product with a stainless steel trowel, and immediately finish the surface with the same tool. All application instructions must be followed.
Application Method:
The substrate must be thoroughly dry and cured. Allow at least 30 days after applying new plaster for complete carbonation. Thoroughly clean or wash the surface, removing any loose parts. If restoration work is involved, water stains must be repaired. Apply the product in two coats, approximately 7-8 hours apart, using a stainless steel trowel. Treat the entire wall surface.
For a "polished marble" effect, finish with BERGGE VENICE, applying a thin layer of product with a stainless steel trowel, and then immediately finish the surface with the same tool. When applying to external surfaces, it is recommended to apply BERGGE WAX to BERGGE VENICE approximately 7 days after application for increased water repellency and weather protection.
Consumption: 2 kg/m² in two coats, depending on the absorbency of the surface.
Application tools: Stainless steel grout
Application temperature: + 5 ° C - + 36 ° C (with a relative humidity of no more than 80%)
Full drying time: 24 hours (at a temperature of 20 ° C with a relative humidity of 75%)
Tool cleaning: Water
WARNING
Protect surfaces from rain for at least the first 24-28 hours after application.