Decorative silicone plaster for creating durable, vapor-permeable coatings for exterior and interior use. This material creates the effect of natural stone, including marble. It is used in insulation systems, especially those using mineral wool. It adheres perfectly to all types of surfaces, including concrete, aerated concrete, cement, plaster, filler, drywall, brick, and surfaces previously painted with water-based paints.
The manufacturer defines the "Marmorino" type as a decorative coating that imitates natural stone such as marble with a coarse texture.
Composition: styrene-acrylic dispersion, silicone emulsion, calcium carbonate, talc, functional additives, water.
Surface preparation: The substrate must be sound, dry, and free of grease, dust, chalk, and lime. Moisture-absorbing surfaces should be primed with Bergge Grund SX silicone primer. To apply an intermediate adhesion layer, use Bergge Harzgrund silicone primer for decorative plaster. The color of the intermediate layer should match the color of the topcoat.
Application Method: During storage, the material may separate, but this is not a sign of product deterioration. Stir before use. If necessary, dilute with water (up to 10%). Apply the plaster to the primed surface in two coats, separating each coat by at least 8 hours. Apply the first coat of material, spreading it evenly over the surface or creating a slight relief for a deeper effect. After the first coat has completely dried, apply the second coat in separate strokes, leaving gaps on a flat surface (or a continuous thin coat on a relief). Then, as it dries, smooth and seal the surface with a spatula. After the plaster has dried, apply Bergge Fasadwax wax (see the product description for application instructions). When applying Bergge Marmorino Fasad Silicon, use material from the same batch on a single surface. If materials from different production batches are used, mix them together in the amount required for a single surface (from corner to corner). Apply at ambient and surface temperatures below 7°C and no higher than 30°C. Avoid exposure to wind and direct sunlight during application and drying. This product can be applied using various techniques to achieve different effects.
Tinting: Tinted using equipment using the COLOR COLLECTION system.
Drying time: 24 hours.
Consumption: 1-1.5 kg/m² when applied in one coat (depending on the type and application method).
Storage: Store in a cool, dry place. Protect from frost! Close the container tightly after use. Guaranteed shelf life is 2 years. The manufacturing date is indicated on the packaging.
Precautions: Work in a ventilated area, wearing protective clothing and gloves. In case of contact with eyes, rinse with water. Dispose of as household waste. Keep out of reach of children! Rinse the tool with water and clean with a household detergent.